MnDOT partners with NBI to support Geotab telematics in winter fleet

Published on November 14, 2024

In the Upper Midwest of the U.S., the state of Minnesota experiences a wide variety of weather, from hot and stormy summers to cold and blustery winters. “The Land of 10,000 Lakes” is no stranger to harsh winter weather. The Minnesota Department of Transportation (MnDOT) wanted to enhance its winter fleet by integrating telematics technology. With a fleet of over 800 snowplows and 30,000 lane miles of roads to cover, winter operations are a major focus for Joe Huneke, Senior Transportation Program Supervisor. While MnDOT has used telematics since 2008, it wasn’t until 2023 when they made the move to Geotab’s telematics platform. Recognizing they would need a strong partner to support the new implementation, MnDOT worked with the expert team at NBI to guide them through the process.

Starting telematics implementation early is key for success

MnDOT’s Geotab implementation began with its light-duty fleet. Legislative funding was provided to equip Geotab devices in Minnesota owned vehicles across its agencies. Since training personnel and outfitting hundreds of vehicles with telematics requires a lot of time, starting early is essential. Well before snow arrives, Minnesota’s public works teams are preparing for winter operations. The decision to roll out Geotab was made in April 2023 and by July, MnDOT began deploying Geotab to prepare for the winter season.

MnDOT fleet
MnDOT fleet when the Geotab devices were being installed. (Photo provided by Joe Huneke)

Minnesota integrates Geotab data and DTN to make informed decisions

It’s important to note, Minnesota’s public works fleet technology is more advanced than most. They aren’t simply tracking routes, vehicle locations and engine data. MnDOT uses a multitude of software programs to forecast fleet requirements including weather patterns, road temperature, material spread rates, citizen 511 mapping and much more. Whenever a “snow event” is expected, a flurry of activity is happening behind the scenes.

Many factors go into the decisions of when and what materials to spread on the roads. The geography of Minnesota varies across the state with the southern region traditionally more humid and less forested than the north. Northern Minnesota also experiences higher snowfalls on average. As a result, decisions about what and how much material to spread is based on data.

To help determine when and what material to spread on the roads, MnDOT uses a special software from DTN called Maintenance Decision Support System (MDSS) to analyze weather and predict pavement conditions. Data from Geotab is processed through the DTN/MDSS software to determine the most effective materials to spread and where to apply them. MnDOT can then examine, and forecast based on current and predicted weather forecasts, road conditions, road material composition, vehicle types, temperatures, location, and more. “We had a few challenges, but ultimately, I think DTN and Geotab/NBI work really well together,” says Joe. As material management is one of the largest focuses for Joe and his team, everyone involved was resolute about how they wanted Geotab data to flow with DTN.

MnDOT MDSS
MDSS determines the most effective materials to spread based on predicted pavement and weather forecasts. (Photo provided by Joe Huneke)

Geotab’s impact on winter ops

One of the biggest roles Geotab plays in MnDOT’s operations is material management. MnDOT has 850 routes to operate throughout the state. All 850 routes are given a pavement forecast and recommendation during an event, so it’s important that all the data is incorporated into the modelling for each route. Not only does the Geotab data help when preparing for a snow event, but it helps provide context post event as well. “Immediately following a big event, everybody wants to know the details about the cost, how the storm stacked up against other events, how much chemical was spread, etc. We must provide that info quickly – this gives us a great way to do that,” says Joe. By analyzing the data from a snow event, MnDOT staff can use it to make determinations for future events as well.

MnDOT snowplows
MnDOT snow plows clearing the road. (Photo provided by Joe Huneke)

Temperature sensors help with material management

Weather conditions and road temperatures play an important role when it comes to salt spreading. The minimum road temperature for MnDOT to spread salt at is between 15-20°F (-9°C to -6°C). Salt can be spread in temperatures as cold as -6°F (-21°C) but is most effective when spread around the freezing point (32°F/0°C). MnDOT extensively uses PreCise temperature sensors to determine whether salt or alternate chemical solutions are the right move for each scenario.

Other factors to consider when spreading include wind speed, rising/decreasing temperatures, and the presence of falling snow. Pavement temperatures can greatly vary between air temperatures – sometimes as much as a 20° difference. During active winters, MnDOT can spread as much as 304.6 thousand tons of salt.

MnDOT Salt Spreader
A MnDOT salt spreader salting the road. (Photo provided by Joe Huneke)

Using Geotab for pre and post trip inspections

Geotab’s DVIR (Driver Vehicle Inspection Report) is a built-in mobile application to confirm drivers inspect their vehicle before hitting the road. Vehicle inspections play an important role in fleet health and driver safety. With the mobile app, drivers can write and take pictures when they identify faulty equipment. The information is sent directly to their supervisor for review, and maintenance is scheduled if needed.

MnDot completed a successful DVIR pilot project in District 2. “We’d like to slowly roll this out throughout the rest of the region,” says Joe. “We’re in the process of deciding where to go from here with it. There’s a lot you can do with it through Geotab, so we’re looking to see what options we have before we go forward. It was a very interesting tool; I really liked it.” That said, MnDOT Snowplow fleet is not moving forward with DVIR at this time.

MnDOT whiteout
A plow clearing the roads in whiteout conditions. (Photo provided by Joe Huneke)

Single Sign On (SSO) provides security and peace of mind

MnDOT uses Geotab’s Single Sign On (SSO) feature, which has given the team the peace of mind knowing their data is safe. SSO provides a seamless process for managing when people come and go. If an employee leaves, there’s no need to worry about someone else accessing important data. “A positive outcome I’ve learned from this is not having to babysit people,” says Joe. “It wasn’t even that big of a thing when I look back on it, but I liked knowing we had the security in place”.

Dash cameras give important context to road conditions

MnDOT currently uses the Surfsight AI-12 dash camera product in its snowplow fleet. Surfsight integrates into MyGeotab and provides fleet managers with important details regarding risky behavior, distracted driving, seatbelt usage, phone usage, and more. By working with the Geotab GO device, it can provide evidence of harsh cornering and braking collected by the GO device.

Thanks to using Surfsight dash cameras in their winter fleet vehicles, MnDOT can verify citizen inquiries and complaints. “For example, we experienced an issue with citizens calling to say a snowplow driver was running red lights,” says Joe. “It was getting to the point where we thought we were going to possibly discipline the driver. Thanks to the cameras, we had evidence to verify if their complaints were not valid”. There was some negative feedback in the beginning from drivers, but they’ve come to appreciate the benefits a dash camera provides them. “It’s been a benefit to quite a few people,” says Joe.

511 gives access to a public facing snowplow map

After a major snow event, it’s natural to want to know when a plow will be in your area. To address this, MnDOT integrated Castle Rock with its MyGeotab database, providing a public-facing website through 511. “It’s a very popular tool,” says Joe. The level of website usership increased tremendously after the public-facing website was turned on. Plow locations are updated in near-real time, with a small delay to ensure driver’s safety.

MnDOT had a similar system in place with the previous telematics vendor and it was well received. “It was nice knowing where the plows were, but we found ourselves wanting more. The Geotab integration has really taken this to the next level”.

MnDOT 511
A screenshot of MnDOT’s public 511 website. (Photo provided by Joe Huneke)

NBI’s support has been very positive

Admittedly, there were some issues with the initial Geotab kick-off. “We went too fast with implementing the telematics and ran into some issues,” says Joe. However, once NBI got involved, things turned around. “They were a great asset to us,” says Joe. “We had some early issues to work through, but everyone involved from NBI were very willing to help. They wanted to see success. They understand what we needed and, how to get us there,” says Joe. “They were a great fit for us”.

Northern BI has extensive experience helping government agencies navigate the world of telematics and public works. With government clients of all fleet sizes, the Northern BI team is ready to take on whatever projects come our way. When clients work with us, they receive a dedicated Customer Success Manager who understands the technology. Our team is proud of the level of support we provide for our clients. No matter your fleet size, we can help governments of all sizes navigate the complex world of winter ops, public works and more. Reach out to Northern BI today if your team is looking to implement Geotab telematics into your fleet.

MNDOT LOGO

Company:

Minnesota Department of Transportation

Fleet Size:

1500

Vehicle types:

Snow plows, salt spreaders, light-duty vehicles

Industry:

Government

“Everyone involved from NBI were very willing to help. They wanted to see success.”

company staff icon

Torrie Rogers

Marketing Coordinator
Linkedin

Learn more about how NBI can help your fleet

Northern BI Logo with moving icons

Download the Geotab Vitality Brochure

Understand how Geotab Vitality aligns with your operational goals and workforce requirements.

Thank you! Your copy of the brochure must begin downloading soon.

Northern BI Logo with moving icons

Download the Altitude by Geotab Brochure

Download the Altitude brochure to explore features, use cases, and insights.

Thank you! Your copy of the brochure must begin downloading soon.

Share This

Share this post with your network!